工業用內窺鏡檢測是無損檢測中目視檢測的一種，工業用內窺鏡檢測與其他無損檢測方式的不同是，它可以直接反映出被檢測物體內外表面的情況，而不需要通過數據的對比或檢測人員的技能和經驗來判斷缺陷的存在與否。并且在檢測的同時，我們可以使用工業用內窺鏡設備對整個檢測過程進行動態的錄影記錄或照相記錄，并能對發現的缺陷進行定量分析，測量缺陷的長度，面積等數據。

Industrial endoscopic testing is a type of visual inspection in non-destructive testing. The difference between industrial endoscopic testing and other non-destructive testing methods is that it can directly reflect the condition of the inner and outer surfaces of the tested object, without the need to judge the existence of defects through data comparison or the skills and experience of the testing personnel. And at the same time of detection, we can use industrial endoscope equipment to dynamically record or photograph the entire detection process, and quantitatively analyze the defects found, measuring the length, area, and other data of the defects.

工業內窺鏡在使用時候要進行日常的維護及修理工作：

Industrial endoscopes require daily maintenance and repair work during use:

1、在進行內窺鏡檢測的時候，對于內窺鏡檢測人員在拿起前端探頭的時候要學會輕拿輕放，一只手必須放到探頭的下面，防止它摔落，影響工作進程。

1. When performing endoscopic inspection, the endoscope inspector should learn to handle the front-end probe gently and place one hand under the probe to prevent it from falling and affecting the work process.

2、內窺鏡前端探頭，工作主要是拍照、錄音、攝像等一系列功能組成，它重要的就是內部前進，查看內部各種情況，就好比人的眼鏡，所以它在日常維護中占的比重是非常重要的，平時我們在對一些特殊的環境下，是在探頭上面套上一層?xùn)|西來對它進行保護，以免摩檫，造成后面圖像的不清晰。

2. The front-end probe of an endoscope is mainly composed of a series of functions such as photography, recording, and videography. Its important function is to move forward internally and view various internal situations, just like human glasses. Therefore, its proportion in daily maintenance is very important. In special environments, we usually put a layer of something on the probe to protect it from rubbing and causing unclear images in the future.

3、在檢測當中，如果遇到內部阻礙物，不能對導線進行硬著硬拉，而需要對它進行查看，想辦法用巧力進入，讓前端繼續前進，如果不這樣的話，容易把導線內部光纖扯壞，不利用圖像清晰，也不利用圖像傳輸。

3. In the detection process, if encountering internal obstacles, it is not possible to forcefully pull the wire, but it is necessary to inspect it and find a way to use clever force to enter and let the front end continue to move forward. If this is not done, it is easy to tear the fiber optic inside the wire, which does not utilize clear images or image transmission.

4、在檢測完成之后我們必須用一些干凈的布進行外部清理，特別是對探頭上面，一定要仔細清理，清理完之后，你按照買內窺鏡時候標配的箱子，把各個部件放到指定位置里面，以保證下次更好的對其檢測。

4. After the inspection is completed, we must use some clean cloth for external cleaning, especially on the probe. It must be carefully cleaned. After cleaning, you should place each component in the designated position according to the box that was standard when buying the endoscope, to ensure better inspection next time.

本文由內窺鏡設備維修友情奉獻.更多有關的知識請點擊:http://www.daybang.cn真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

This article is dedicated to the maintenance of endoscopic equipment. For more information, please click: http://www.daybang.cn Sincere attitude. We will provide you with comprehensive service. We will gradually contribute more relevant knowledge to everyone. Stay tuned

工業用內窺鏡檢測是無損檢測中目視檢測的一種，工業用內窺鏡檢測與其他無損檢測方式的不同是，它可以直接反映出被檢測物體內外表面的情況，而不需要通過數據的對比或檢測人員的技能和經驗來判斷缺陷的存在與否。并且在檢測的同時，我們可以使用工業用內窺鏡設備對整個檢測過程進行動態的錄影記錄或照相記錄，并能對發現的缺陷進行定量分析，測量缺陷的長度，面積等數據。

Industrial endoscopic testing is a type of visual inspection in non-destructive testing. The difference between industrial endoscopic testing and other non-destructive testing methods is that it can directly reflect the condition of the inner and outer surfaces of the tested object, without the need to judge the existence of defects through data comparison or the skills and experience of the testing personnel. And at the same time of detection, we can use industrial endoscope equipment to dynamically record or photograph the entire detection process, and quantitatively analyze the defects found, measuring the length, area, and other data of the defects.

工業內窺鏡在使用時候要進行日常的維護及修理工作：

Industrial endoscopes require daily maintenance and repair work during use:

1、在進行內窺鏡檢測的時候，對于內窺鏡檢測人員在拿起前端探頭的時候要學會輕拿輕放，一只手必須放到探頭的下面，防止它摔落，影響工作進程。

1. When performing endoscopic inspection, the endoscope inspector should learn to handle the front-end probe gently and place one hand under the probe to prevent it from falling and affecting the work process.

2、內窺鏡前端探頭，工作主要是拍照、錄音、攝像等一系列功能組成，它重要的就是內部前進，查看內部各種情況，就好比人的眼鏡，所以它在日常維護中占的比重是非常重要的，平時我們在對一些特殊的環境下，是在探頭上面套上一層?xùn)|西來對它進行保護，以免摩檫，造成后面圖像的不清晰。

2. The front-end probe of an endoscope is mainly composed of a series of functions such as photography, recording, and videography. Its important function is to move forward internally and view various internal situations, just like human glasses. Therefore, its proportion in daily maintenance is very important. In special environments, we usually put a layer of something on the probe to protect it from rubbing and causing unclear images in the future.

3、在檢測當中，如果遇到內部阻礙物，不能對導線進行硬著硬拉，而需要對它進行查看，想辦法用巧力進入，讓前端繼續前進，如果不這樣的話，容易把導線內部光纖扯壞，不利用圖像清晰，也不利用圖像傳輸。

3. In the detection process, if encountering internal obstacles, it is not possible to forcefully pull the wire, but it is necessary to inspect it and find a way to use clever force to enter and let the front end continue to move forward. If this is not done, it is easy to tear the fiber optic inside the wire, which does not utilize clear images or image transmission.

4、在檢測完成之后我們必須用一些干凈的布進行外部清理，特別是對探頭上面，一定要仔細清理，清理完之后，你按照買內窺鏡時候標配的箱子，把各個部件放到指定位置里面，以保證下次更好的對其檢測。

4. After the inspection is completed, we must use some clean cloth for external cleaning, especially on the probe. It must be carefully cleaned. After cleaning, you should place each component in the designated position according to the box that was standard when buying the endoscope, to ensure better inspection next time.

本文由內窺鏡設備維修友情奉獻.更多有關的知識請點擊:http://www.daybang.cn真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

This article is dedicated to the maintenance of endoscopic equipment. For more information, please click: http://www.daybang.cn Sincere attitude. We will provide you with comprehensive service. We will gradually contribute more relevant knowledge to everyone. Stay tuned